JDB-1 Solid lubricating bearings
- Solid lubricating bearingsJDB-1 solid mosaic bearing, at high force brass substrate. Mosaic graphite or MoS2 solid lubricant is a high-performance solid lubricant. It broke through the general bearing lubrication film to rely on limitations. During use, heat through friction with the shaft friction of solid lubrication, forming oil, lubrication powder coexist excellent condition, both to protect the shaft is not worn, and the solid lubricant properties eternal. Its hardness copper sleeve than twice as high wear resistance is also twice as high.
Technical ParametersSize table Download
| Chemical composition | CuZn25A16Fe3Mn4 | Friction coefficient μ | <0.16 |
| Dynamic load limit | 100N/mm² | Max.temp | 300 ℃ |
| Hardness | HB 210~270 | Maximum sliding speed | Dry0.4m/s oil5m/s |
-
-
JDB-1
Solid lubricating bearingsJDB-1 solid mosaic bearing, at high force brass substrate. Mosaic graphite or MoS2 solid...
READ MORE >>
-
-
JDB-2
Solid lubricating bearingsJDB-2 bronze inlaid bearing, is the 6-6-3 bronze matrix, embedded graphite and MoS2 ...
READ MORE >>
-
-
JDB-3
Solid lubricating bearingsJDB-3 copper inlaid bearing steel, steel sleeve is in the base of the body, the whole ...
READ MORE >>
-
-
JDB-4
Solid lubricating bearingsJDB-4 cast iron inlaid bearing, as base material is HT250 and embedded with solid ...
READ MORE >>
-
-
JDB-5
Solid lubricating bearingsJDB-5-yl steel inlaid bearing, strengthening products, has a high compression performance ...
READ MORE >>
